Connector pin-outs
6.2
Output port and breakout box RECORDER
connector (high-gain option)
These units use the same plug with the following pin assignments. High gain
velocity outputs are denoted HGV.
This is a standard 26-pin military specification
bayonet plug, conforming to MIL-DTL-26482 (formerly
MIL-C-26482). A typical part-number is 02E-16-26P
although the initial “02E” varies with manufacturer.
Suitable mating connectors have part-numbers like
***-16-26S and are available from Amphenol, ITT
Cannon and other manufacturers.
Pin
Function
Pin
Function
A
Velocity
+ve,
vertical ch.
P
Calibration signal (all ch)
B
Velocity –ve, vertical ch.
R
Calibration enable (all ch)
C
Veve, N/S ch.
S HGV -ve, vertical channel
D
Velocity –ve, N/S ch.
T HGV +ve, vertical channel
E
Veve, E/W ch.
U
Acc/Vel (or Centre - see P16)
F
Velocity –ve, E/W ch.
V
N/S centring motor*
G
Mass position, vertical ch.
W
E/W centring motor*
H HGV –ve, E/W channel
X
Vertical centring motor*
J
Mass position, N/S ch.
Y
Motor return*
K HGV +ve, E/W channel
Z HGV -ve, N/S channel
L
Mass position, E/W ch.
a HGV +ve, N/S channel
M
-12V DC (3-way power opt)
b
Power ground
N
Signal ground
c
+12V DC supply
Wiring details for the compatible socket, ***-
16-26S, as seen from the cable end.
36
Issue F - June 2019
