Using the DM24
6. Select the streams you want to replay, and click Open. The disk will appear in
the left-hand pane of Scream!'s main window, and the streams you have
selected will start playing into the stream buffer, as well as being recorded.
7. When you have finished transferring the data, if you want to reset the disk,
select File Reset SCSI disk… from Scream!'s main menu. Select the disk you
→
want to reset, and click OK.
4.5.3 Downloading over the serial link
Start by configuring Scream to record all incoming data by visiting the “Recording”
tab of the File Setup dialogue:
→
Ensure that the first four check-boxes are ticked. Next, switch to the “Files” tab and
choose an appropriate base directory, file format and filename format.
Click
to save your changes and close the dialogue.
Next, open a connection to the digitiser's console. To do this using Güralp Systems'
Scream! software, right-click on the digitiser's icon ( ) and select
Terminal…
. From
a Güralp EAM, issue the command
data-terminal
and select the appropriate data source from the menu.
To simply download all data held in the Flash memory, issue the command
ALL-FLASH ALL-DATA DOWNLOAD
followed by
GO
This will initiate a complete download. The
ALL-FLASH
and
ALL-DATA
commands
act as modifiers to tell the system what to download.
29
Issue U - December, 2021
