Guntermann & Drunck DVI-Vision-IP, Installation And Operating Manual

Page: 98 / 148

Establishing a KVM-over-IP™ connection for the first time
21 · G&D DVI-Vision-IP
(De)Activating signals
By default, the KVM switch transfers not only keyboard, video and mouse data but
also audio data between switches.
In addition, you can enable the transmission of RS232 data and, alternatively,
disable the transmission of audio data.
How to (de)activate the transmission of audio or RS232 signals:
1. Use the remote hotkey Ctrl+
Num
to open the OSD of the computer module.
2. Select the row
KVM connection
and press
Enter
.
3. Under
Activated signals
use the arrow keys to check the box of the signal you want
to (de)activate and press
F8
.
4. Press
F2
to save your settings.