Expanding switchable signals
G&D ControlCenter-Digital-288 ·
23
English
Adding or deleting modules from a channel group
How to add modules to or delete them from a channel group:
1. In the menu, click on
Matrix systems > [Name] > User modules
or
Target modules
.
2. Click on a console module or a target module that is already assigned to the
chan-
nel group to which you want to add another module or from which you want to
delete a module.
3. Click on
Channel grouping
.
Now you can see the current configuration. The right column (
Not assigned
) lists
the matrix switch modules you can add to the channel group.
4. Add more modules to or delete them from the
channel group
:
5. Click on
Save
.
NOTE:
You can assign up to seven additional video channels and a USB or
RS232 channel to a console’s KVM channel.
You can assign up to seven additional video channels to the KVM channel of the
computer, too. In addition, you can create
pools
of four devices for the USB 2.0/
RS 232 channel and for each of the four multi-channels.
Adding modules:
In the right column (
Unassigned
), click on the mod-
ule you want to add. In the left column (
Device
group
), click on the channel to which you want to
add the module.
Click on (
arrow left
) to assign the module to the
selected channel.
Deleting modules:
In the right column (
Assigned
), click on the module
you want to delete from the
channel group
.
Click on (
arrow right
) to delete the module’s
assignment.