Operating Instructions
and Parts List
for
No. H-24
24" Tile Cutter
IP-H-24 10/21/05
Page 1: ...Operating Instructions and Parts List for No H 24 24 Tile Cutter IP H 24 10 21 05...
Page 2: ...can or should be cut with little or no shear angle Other types that are harder to cut need varying degrees of shear angle Shear angle will be discussed further in the instructions for cutting various...
Page 3: ...ng between the blades when the cutter is in the closed position should be about at the handle side and at the other side for thick tile The opening in the closed position should be greater for thicker...
Page 4: ...2 Thumb Screw with Nut 10 H 24 17 8 Post Adjusting Set Screw 11 H 24 18 4 Post Mounting Screw Assembly with Flat Washer and Lock Washer 12 H 24 19 1 Right Upper Blade Bar Post 13 H 24 20 1 Left Upper...
