Hélicoptères Guimbal
SECTION 8
CABRI G2
HANDLING AND SERVICING
8-4
Approved under DOA EASA.21J.211
Jump-starting the engine
Jump-starting the engine is an acceptable practice in case of a low battery.
Only use 12V lead acid battery for jump starting. Proceed in following order:
1. Connect the red cable to helicopter battery plus,
2. Connect it to the external battery plus,
3. Connect the black cable to helicopter battery ground,
4. Connect it to the external battery ground,
5. Start the engine (with left cowling open),
6. Remove in opposite order.
Caution
: a dead battery is not airworthy and should not be jump started.