USB streaming takes whatever audio is playing on your computer's sound card and sends it to
outputs 1-2. Adding either the microphone input or Line In 1-2 input mixes the corresponding
input in with the USB streaming audio on outputs 1-2.
Please note that in order to change audio modes on PC (from 4 inputs/4 outputs to 2
inputs/6 outputs, or the reverse), no audio must currently be streaming.
6.3.6.
About
tab
- This tab provides all of the information on the versions of the package, firmware, driver, DJ API
and control panel you are using. Please refer to this information when contacting technical
support. The contents of this tab are only visible when DeeJay Trim 4&6 is connected to your
computer.
6.3.7.
Advanced audio settings
- Sample rate represents the number of times that your audio is sampled per second. Switching
to a higher sample rate (48000Hz) can be beneficial when recording, as this can provide higher
quality recordings.
- Sample size also affects the quality of your recordings, with a higher sample size providing
higher quality recordings.
- ASIO buffer size: increasing the ASIO buffer size will put less stress on your system, and should
also be effective in eliminating any problems (i.e. clicks and pops) you may hear in your audio.
If you notice any issues in terms of audio quality, you can experiment with increasing the ASIO
buffer size and see if that helps to resolve the problem.
- DeeJay Trim 4&6 is ASIO 2.0-compatible, allowing you to use ASIO 2.0 VST plug-ins and add
amazing effects to your music.
18/24
