41
Object Mapper Measurements with Baseline
When the Start the project
button is pressed, the Start
Profile screen appears
Once Start Profile is pressed, the user returns to the
ordinary measurement screen. The additional Baseline
Crossing icon will be active on this screen.
When passing the baseline, select the menu option BL
Crossing (bottom button) to place a marker on the GPR
profile. This marker will be used to connect the current
profile to the defined baseline.
Note: The baseline crossing marker can be created anywhere along the GPR profiles e.g. at
the beginning, middle or end but the baseline must cross through all the profiles. If starting the
profile directly on the baseline, press BL Crossing immediately after pressing Start, in other
words, before moving the antenna
.
