Configuring the DP Output
To Configure a DP Output Channel
1. Click on the
DP Config
tab of the Service Interface.
2. Click the
Take Command
button if not already done.
3. Select Output Channel A, B, C or D.
4. Click
Edit
.
5. Click
Apply
to save the changes or
Cancel
to discard.
35
The main purpose of an Artemis system is to provide positioning data to the DP (Dynamic
Positioning) system of a marine vessel. The Service Interface can configure up to four DP output
channels from the PC running the Manager service.
Summary of Contents for Artemis Mk6
Page 54: ......