Changing the Network Configuration
Three communication links can be configured from the Service Interface:
•
Service Interface to Manager
•
Manager to Sensor (Antenna Unit)
•
Manager to Validator (when available)
To Make Changes to the Network Configuration
1. Click on the
Network Config
tab of the Service Interface.
2. Click the
Disconnect
button for the type of communication that you wish to modify.
3. Click the
Edit
button.
4. Alter the settings as required.
5. Click
Apply
to save the changes or
Cancel
to discard.
If the Manager is running on the same PC as the Service Interface, enter 127.0.0.1 as the IP address.
34
Summary of Contents for Artemis Mk6
Page 54: ......
