GUDEL ZP 3-5 V4, Operating Manual

Page: 277 / 354

11.3 Decommissioning
11.3.1 Shutdown
WARNING
Falling axes, workpieces
Falling axes or workpieces can cause physical damage, serious or fatal injuries!
• Set down any workpieces before working in the danger area
• Never enter the area below suspended axes and workpieces
• Secure suspended axes using the stipulated equipment
• Check the belts of the telescope axes for signs of breakage and tears
Do not empty the lubrication lines and the gearbox when shutting down the
product.
To shut down the product, proceed as follows:
1 Lock the axes in place
2 Switch off the system (main switch of complete system)
3 Disconnect the supply lines for energy and consumables
4 Automatic lubrication system (option): Unscrew the lubricant dispenser
and remove the batteries
The product has been shut down.
11.3.2 Cleaning, rust-proofing
Clean away any dirt and dust from the product. Clean the product thor-
oughly. Dispose of any cloths soaked in oil or grease in an environmentally
friendly manner.
Ü 2
281
Apply corrosion protection to all bright parts.
11.3.3 Transport securing devices
On unbraked motors, mount the transport securing devices.
Decommissioning, storage OPERATING MANUAL ZP 3-5 V4
72057594174110603_v5.0_
EN-US
277