GUDEL NGHP Series, Service Manual

Page: 85 / 146

A B C D E F
Fig. 7-3 Remove motor: Planetary gearbox Güdel
A Motor D Plug
B Motor screws (if necessary with spacers
according to motor manufacturer specifi-
cations) E Coupling screws
C Motor shaft F Drill hole
Remove the motor as follows:
1 Remove the plug
2 Check if the coupling screws can be reached through the drill hole
3 If there are deviations: Adjust axis until the coupling screws can be
reached through the drill hole
4 Switch off the system and padlock it to prevent it from being switched on
again
5 Attach slings to the motor
Ü 2
83
6 Release the coupling screws
7 Remove the motor screws
8 Remove motor
The motor has been removed.
Maintenance
SERVICE MANUAL Planetary gear Güdel NRH, NRHP,
NGHP
18014399245011339_v2.0_
EN-US
85