3
Operation
3.1
Setting the lubrication cycle / lubrication
quantity
The following table shows the lubricant consumption when standard settings
are used.
You can find additional settings in the third-party documentation from
MEMOLUB.
Lubrication cycle
The lubrication cycle is 48 hours long. Perform lubrication work at the latest
when the first signs of tribocorrosion (reddish discoloration of the track)
show.
Emptying time of
the cartridge
The emptying time was measured using the black dosing ring. This is the de-
fault setting at Güdel.
Cartridge 120 ml
Cartridge 240 ml
Cartridge 480 ml
12 months
24 months
36 months
Table 3-1
Emptying time of the cartridge
Lubrication quan-
tity
Per lubrication cycle, the lubricant dispenser discharges the following lubrica-
tion quantity to the progressive distributor:
Lubrication quantity [ml]
Lubrication quantity per output
on the progressive distributor
[ml]
0.635
0.1015
Table 3-2
Lubrication quantity per lubrication cycle: at the lubricant dispenser / at an output of the progressive
distributor
The lubrication quantity per output on the progressive distributor is usually
equal. However, closing an output affects the lubrication quantity per output.
Operation
SERVICE MANUAL Automatic lubrication system
Memolub HPS
9007199349414283_v2.0_
EN-US
17
