GUDEL FlexxPump4 D, Operating Manual

Page: 108 / 151

Temperature
The ambient temperature must remain between -10 and +40 °C. Make sure
that the product is not subjected to great temperature fluctuations.
Air humidity
The air humidity must be below 75%.
9.3 Decommissioning
9.3.1 Shutdown
Do not empty the lubrication lines and the gearbox when shutting down the
product.
To shut down the product, proceed as follows:
1 Switch off lubrication system
2 Remove lubrication cartridge
3 Remove connecting cable
4 Disconnect the lubrication lines from the hydraulic outputs
The product has been shut down
9.3.2 Cleaning, rust-proofing
Clean away any dirt and dust from the product. Clean the product thor-
oughly. Dispose of any cloths soaked in oil or grease in an environmentally
friendly manner.
Ü 2
113
Apply corrosion protection to all bright parts.
9.3.3 Identification
Label the product with the following data:
• Date of decommissioning
• Internal machine number/name
• Additional data as per internal guidelines
Decommissioning, storage OPERATING MANUAL Lubrication system FlexxPump4 D
9007202674126091_v2.0_
EN-US
108