GUDEL FlexxPump4 B, Operating Manual

Page: 78 / 157

7.2.2.2 Lubricant table
Lubrication ex
works Specifi-
cations Lubri-
cant
quantity Location of appli-
cation Cate-
gory
Elkalub FLC 8
H1
Cannot be
deter-
mined
Lubrication system
FlexxPump: Pre-lu-
bricating rails and
racks
Oil
Güdel H1 NSF
no. 146621
Cannot be
deter-
mined
Lubrication system
FlexxPump
Oil
Rivolta F.L.125
Cannot be
deter-
mined
Lubrication system
FlexxPump
Oil
Rivolta F.L.500
Cannot be
deter-
mined
Lubrication system
FlexxPump
Oil
This table does not purport to be exhaustive.
Tab. 7-6 Lubricant table
7.3 Maintenance tasks
7.3.1 Maintenance intervals
The product is subject to natural wear and tear. It wears out, which can cause
unscheduled downtimes of your system. Güdel defines the service life and
maintenance intervals of the product to ensure safe, uninterrupted operation.
Operating hours
Güdel always uses Power On as the operating time for the maintenance inter-
val indicators. Power On shows the duration in which the drives are located
in the control system.
Duty cycle
The maintenance intervals refer to the effective operating hours of the prod-
uct at a duty cycle (ED) of 100%. The duty cycle always refers to the entire
process. This means that the duty cycle of specific axes cannot be considered
individually.
Maintenance OPERATING MANUAL FlexxPump4 B lubrication system
3421295627_v1.0_
EN-US
78