GUDEL CP 3-5 V2, Operating Manual

Page: 22 / 350

The technician is responsible to third parties in his area of responsibility.
During a training session or instruction, the technician may only work on the
product under the supervision of an experienced manufacturer's technician.
3.1.2.1 Operating companies
The operating company is responsible for ensuring that:
• the product is used as intended
• the product is sufficiently lubricated at all times
• all safety aspects are complied with
• the product is put out of operation if the functioning of the safety equip-
ment is not fully guaranteed
• the technician working on the product is appropriately trained
• the technician is provided with personal protective equipment
• the operating manual is available to the technician at the operation site of
the product at all times
• the technicians are kept up-to-date regarding best practice
• the technicians are informed about technical progress, modifications, and
the like.
• the contracted cleaning staff only work under the supervision of a mainte-
nance technician
3.1.2.2 Transport specialists
The transport specialist:
• is able to transport loads safely
• is able to use slings safely and properly
• is able to secure the load properly
• has experience in transportation
3.1.2.3 Fitters
The fitter:
• has very good mechanical and/or electrical knowledge
• is flexible
• has assembly experience
Safety OPERATING MANUAL CP 3-5 V2
9007202252815371_v1.0_
EN-US
22