GUDEL CP 3-5 V2, Operating Manual

Page: 17 / 350

1 Declaration of incorporation
The manufacturer: GÜDEL AG
Industrie Nord
CH-4900 Langenthal
hereby declares that the partly completed machine:
Product, type
Serial number
Parts list
Year of manufacture
corresponds to the fundamental requirements of the Machinery Directive
(2006/42/EC), Appendix 1.
The partly completed machine may only be commissioned after it has been
determined that the machine into which the partly completed machine is to
be incorporated complies with the stipulations of Machinery Directive
(2006/42/EC).
The special technical documentation as per Appendix VII Part B has been
compiled. This is submitted in electronic form, depending on the respective
regulations of the national bodies.
Authorized representative responsible for compiling the technical documenta-
tion:
Alain Knuchel Tel. +41 (0)62 916 92 31
The partly completed machine complies with the following additional EC di-
rectives:
• Low Voltage Directive 2014/35/EU
• EMC Directive 2014/30/EU
The primary requirements of the following harmonized standards have been
applied:
EN ISO 12100:2010; EN 60204-1:2006
Langenthal,
Markus Ruprecht
CEO Alain Knuchel
General Manager
Robotics
Declaration of conformity, declaration of incorporation OPERATING MANUAL CP 3-5 V2
9007202252815371_v1.0_
EN-US
17
CP 3-5 V2
99xxxxxxx
10xxxxxxx
2019
xx.xx.20xx