7
Expert Sensor Box 7211/7212
Device Description
Firmware-Update
1.7
To perform a firmware update, the program GBL_Conf.exe and the latest firmware is needed.
Enable the bootloader mode (see Chapter Bootloader Mode)
Start GBL_Conf.exe
Select the device for which a firmware update is to be performed
Click "Program Device" and then select there "Firmware Update"
Specify the firmware file that should be uploaded
Upon completion of the update process, please start the new firmware of the device. You can do this by
simply leaving the bootloader mode.
A firmware update, unlike other functions, is not sent as a network broadcast. Therefore, the device
must have a valid IP address and a valid netmask before the firmware update. If necessary, please cor-
rect the entries in GBL_Conf.exe in bootloader mode and save them with "Save Config".
If after a firmware update, the web page is not displayed correctly anymore, this may be related to the
interaction of Javascript with an outdated browser cache. Not always helps a Ctrl-F5, it is recommen-
ded that you manually delete the cache in the browser options. Alternatively, you can test start the
browser in "private mode".
Technical Specifications
1.8
Interfaces:
1 x Ethernet port (RJ45)
1 x Connector for AC Adaptor
Network connectivity:
10/100 MBit/s 10baseT Ethernet
Protocols:
TCP/IP, HTTP, SNMP v1 und v2c,
SNMP traps, Syslog, E-Mail (SMTP)
Power Supply:
AC Adaptor (12V DC, 0,5A)
Environment
·
Operating temperature:
·
Storage temperature:
·
Humidity:
0°C - 50°C
-15°C - 60°C
10% - 85%
Measurements:
90mm x 25mm x 63mm (L x H x W)
Weight:
approx. 100g
Configuration
2
TCP/IP configuration by DHCP
After switching on the device is scanning on the Ethernet for a DHCP server and requests an unused IP
address. Check the IP address that has been assigned and adjust if necessary, that the same IP ad-
dress is used at each restart. To turn off DHCP use the software GBL_Conf.exe or use the configurati-
on via the web interface.
To check the network settings with GBL_Conf.exe, start the program and choose "All Devices" in the
"Search" menu. From the list select the appropriate device. The lower part of the left half of the window
