Gude Expert Power Control 1100, Manual

Page: 18 / 23

18
Expert Power Control 1100/1101 Operation
5.2.1.1 Reset
By using this function, the port will be switched off. Ten seconds later, the port will switch on again, automatically.
5.2.1.2 Batchmode
The Power Port of the Expert Power Control 1100/1101 can be switched on or switched off for a selectable delay (1-30 sec.
or 1-30 min.). After the chosen delay the selected port will be switched off or switched on again automatically.
5.3
Sensor
Connect the temperature sensor with the sensor connector at the front of the device. If it is connected exactly, the recent
temperature is displayed in the login window, in the switching window and can be requested via SNMP.
The temperature sensor can be ordered as additional supplies. More information can be found at www.gude.info or requested
at mail@gude.info.
Temperature sensor 7001
Hybrid sensor 7002
Temperature sensor 7001
Cable length ˜ 2m
Connection MiniDIN
Measurement -20°C - +100°C ±2°C (max) and ±1°C (typical)
Hybrid sensor 7002
Cable length ˜ 2m
Connection MiniDIN
Measurement -20 - +80 Grad, ± 0,5°C / Moisture 0-100% ±3%