Gude Expert Net Control 2304 Manual Download Page 19

Page: 19 / 87

Expert Net Control 2304

Operating

Firmware Update: Start a firmware update.

SSL Certificate Upload: Saves your own SSL certificate. See chapter "SSL

" for the

generation of a certificate in the right format.

Config Import File Upload: Loads a new configuration from a text file. To apply the new
configuration, a "Restart Device" must be executed after the "Upload".

Config File Export: Saves the current configuration in a text file.

Saving the configuration should only be carried out in an SSL connection, since it

contains sensitive password information (even if it is encrypted or hashed).

Restart Device: Restarts the device without changing the status of the relays.

Some functions such as a firmware update or changing of the IP-address and

HTTP settings require a restart of the device. A jump to the boot loader or a restart of
the device lead by no means to a change of the relay states.

Restore Fab Settings and Restart Device: Performs a restart and resets the device to
factory default

Enter Bootloader Mode: Jumps into bootloader mode, where additional settings can be
made with GBL_Conf.exe.

Flush DNS Cache: All entries in the DNS cache are discarded and address resolutions
are requested again.

Config/Status View: status.html: Displays the status.html page with the JSON data.

Summary of Contents for Expert Net Control 2304
























































































Search results

Summary of Contents for Expert Net Control 2304

Reviews:

Gude Expert Net Control 2304, Manual, Page: 19 / 87

Search results

Summary of Contents for Expert Net Control 2304

Reviews: