Gude Expert Net Control 2302, Manual

Page: 40 / 88

40
Expert Net Control 2302 © 2021 GUDE Systems GmbH
Configuration
Enable Time Synchronization: Enables the NTP protocol.
Primary NTP server: IP address of the first NTP server.
Backup NTP server: IP address of the second NTP server. Used when the first NTP
server does not respond.
Timezone: The set time zone for the local time.
Daylight Saving Time: If enabled, the local time is converted to Central European Sum-
mer Time.
set manually: The user can set a time manually.
set to Browsertime: Sets the time corresponding to web browser.
If Time synchronization is enabled, a manual time will be overwritten at the next
NTP synchronization.
3.5.2
Timer
Enable Timer: nables or disables all timers globally.
Syslog verbosity level: Sets the verbosity level for timer syslog output.
New Rule simple Timer: Shows a dialog for a simple timer rule.
New Rule advanced Timer: Brings up the dialog for advanced timer settings.
3.5.3
Timer Configuration
In the timer configuration you have three options: Create a simple timer, add a com-
plex timer, or change an existing configuration.
Timer rules are only executed if the device has a valid time. See configuration
NTP .
This instruction chapter applies to all Gude devices. For devices without switchable
ports you can only create a complex timer. For an action there is only the register "Ac-
39