Gude 94567, Translation Of The Original Instructions

Page: 19 / 72

15
GESF 260
Defects searching
Symptom Possible cause Removal
Engine not starting Feeder cable is not connected or is faulty Check the cable, plug it or replace it
or have it repaired by a professional
if necessary.
House wiring fuse is overloaded Switch the fuse on or use a house con-
nection with higher protection or have it
installed by a professional.
Wrong switch/plug combination Have it repaired by an authorised shop.
Engine mum-
bling but not running
blower worm or eject channel is blocked. Unplug the appliance, remove the blo-
cking, wait for app. 10 minutes and start
the appliance again.
Abnor-
mal sound (grum-
bling, rattling, clatter)
Screws, nuts or other tightening compon-
ents are loose.
Tighten the components. If the abnor-
mal sound persists, contact immediately
an authorised shop.
Shaking, vibrations Loose components or the blower worm
is damaged.
Stop the engine. Unplug the appliance.
Have the damaged blower worm re-
paired. Tighten any loose screws and
nuts.
Appliance not remo-
ving snow
blower worm or eject channel is blocked. Stop the engine. Unplug the appli-
ance. Remove the blocking.
V-belt is loose or broken. Have the V-belt checked in an authori-
sed shop.
ENGLISH
G
B
Güde 94567 Schneefräse_1.0.indd 15 01.03.12 11:16