Do not use the appliance on either
paved or gravel surface. Ejected material
may cause injury.
Check all bolts, nuts and other fixing parts
and their tightness as well as safeguards
with respect to their placement before use.
Replace damaged or illegible warning and
information decals.
Make sure the filling hopper is empty
before turning the appliance on.
Keep your face and body out of reach of
the filling hopper.
Avoid approaching of your hands,
other body parts and clothes to the filling
hopper and ejection hole. (Fig. D)
Turn off the appliance before coupling and
uncoupling of the collection bag.
Always ensure balance and a safe stance.
Do not lean over ahead too much and do
not stand higher than the appliance leg
when filling the hopper.
Keep distance from the ejection zone.
To a maximum extent possible make sure
the material being processed does not
include metal parts, stones, bottles, cans
and other foreign things.
If foreign thing gets in the appliance, turn it
off; the appliance sounds abnormally or
vibrates. Unplug the appliance from socket
and continue as follows:
- assess damage;
- replace all damaged parts or make
them repaired;
- check if the parts are free and
retighten, if necessary.
Do never attempt to repair the appliance
despite you are properly trained for this
purpose.
Make sure the material being processed
does not accumulate in the ejection shaft;
transport of the material is prevented and
reverse impact in the filling hopper may
take place.
If the appliance is clogged, turn it off and
wait until running down. Unplug the
appliance from socket before removing the
material being shredded from the
appliance.
Check whether the safeguards and covers
are intact and connected properly. Perform
maintenance or repair, if needed, before
use.
Do never attempt to change engine
revolution settings. In case of problems,
contact a specialist.
Keep ventilation holes without residues
and other deposits to avoid engine
damage and potential fire.
Do never lift or remove the appliance if it is
on and running.
Turn the appliance off, wait until the
cutting mechanism stops, and unplug the
appliance every time you leave the
workplace.
Do never tilt the appliance during
operation.
Do never expose the appliance to rain and
moisture. Store the appliance on a dry
place only.
Do never attempt to disengage the forced
turning off.
Application according to intended use
The appliance is intended for shredding of
fibrous and woody garden waste for
composting purposes. Collection bag or
collection box is intended only for
collection of shredded material (not for
storing). Do never stand on the collection
box.
Any other use contradicts to the intended
use. Manufacturer is not responsible for
subsequent damage and injuries. Please
note the appliance is intended for
domestic use only.
Summary of Contents for 94375
