Reference No.:
S 50126221 0002
*The appliance complies with requirements of EN 61000-
3-11 and subjects to special conditions for connection. It
means that use on any freely selectable connection points
is not permitted. In case of non-conforming power supply
grid, the appliance may cause temporary voltage
fluctuations. The appliance is designed only for connection
to the connection points of which maximum permitted grid
impedance does not exceed Zmax = 0,233
Ω
.
As a user, upon consultation with your electric energy
supplier, if necessary, you must make sure the connection
point you want to use for this appliance complies with the
requirement specified above.
Warranty
The warranty applies exclusively on material or production
defects. For warranty claims, please submit an original
proof of purchase with date of purchase indicated. The
warranty does not cover unprofessional use, such as
overloading, violent use, damage caused by third party or
a thing. The warranty also does not cover failure to comply
with the operation manual and normal wear and tear.
Residual risks and protective measures
Electric residual risks:
Risk
Description
Protective measure(s)
Direct
electric
contact
Electric shock
Protective switch against
stray current FI
Indirect
electric
contact
Electric shock
via medium
Protective switch against
stray current FI
Other risks:
Risk
Description
Protective measure(s)
Always wear goggles and
protective gloves.
Hurled
objects
Shredded
material,
foreign things
etc. may be
hurled away
from the
appliance and
cause injury
You and bystanders must
keep sufficient safety
distance
Slipping,
tripping or fall
of persons
The power
cable and
appliance may
be cause of
tripping.
Depending on type of
installation, adopt relevant
measures. (Suitable place of
installation, identification of
place of installation etc.)
Emergency procedures
Administer first aid according to injury and call for qualified
medical assistance.
Protect injured person against other injuries and keep
him/her in rest.
For reasons of potential injury, a first aid box
according to DIN 13164 must be available on
workplace. Replenish immediately material used from
the first aid box.
If you require medical assistance,
give the following information:
1. Place
of
accident
2. Type
of
accident
3.
Number of injured persons
4. Type
of
injury
Disposal
Disposal instructions are illustrated in the form of
pictograms on the device or packaging. Description of the
pictograms is given in "Identification" chapter.
Disposal of transport packaging
Packaging protects the device against damage during
transport. Packaging materials are usually selected
according to their effect on environment and disposal
methods and can therefore be recycled.
Returning of the packaging back to circulation saves
resources and costs for packaging disposal.
Parts of the packaging (e.g. foil, styropor) may be
dangerous for children.
Risk of suffocation!
Keep these parts of the packaging out of reach of children
and dispose as soon as possible.
Operator requirements
The operators must thoroughly read operation manual
before use.
Qualification
Except for thorough training by an expert for use of the
device, no special qualification is required.
Minimum age
The device may be operated by persons over 16 years of
age. An exception is use by younger person if the use
takes place under supervision of an adult trainer in the
course of education.
Training
Use of the device requires corresponding guidance by an
expert or operation manual only. No special training is
required.
Service
Any technical questions?
Complaint?
Do you need
spare parts or operation manual?
Go to our website
www.guede.com
and the section
Service
will help you quickly and without bureaucracy.
Please, help us to help you. In order to identify your device
in case of complaint, please indicate serial number, order
number and year of manufacture. All information is
available on the product label. To have all information
always at hand, put them down.
Serial number:
Order number:
Year of manufacture:
Phone:
+49 (0) 79 04 / 700-360
Fax:
+49 (0) 79 04 / 700-51999
E-Mail:
Maintenance and storage
Keep the air hole and body free from dust and dirt.
Use soft cloth and fine soap solution for cleaning. Avoid
direct contact of the appliance with aggresive cleaning
agents. Do not use aggresive, volatile or caustic products.
Have your electric garden waste shredder inspected
annually by a qualified authorized specialist.
Protect the appliance against moisture and dust.
20
