GB
replaced at an authorised professional. Check the
extension cable regularly and if damaged, replace
it. Keep the handgrips dry and free of any oil and
grease.
•
Unplug. Unplug before any maintenance and
replacement of tools.
•
Do not leave any wrenches and spanners in the
machine. Make sure that any wrenches and
adjustment tools are removed before switching on.
•
Prevent unintentional switching on. Do not carry the
plugged-in machines with a finger on the switch.
When plugging in, make sure that the switch is in
off position.
•
Extension cables for outdoors use. When working
outdoors, use only the cable for the purpose
marked as appropriate.
•
Be attentive at any time. Watch out what you are
doing. Proceed thoughtfully. Do not use the
machine when feeling unconcentrated.
•
Check the machine for damages. Inspect the
machine before any following use and check the
function of protective devices. Check the function of
movable parts for jamming or damage. All the parts
must be mounted correctly and meet the conditions
that guarantee a perfect operation.
.
Emergency Action
Apply the first aid adequate to the injury and get qualified
medical assistance as quickly as possible. Protect the injured
person from more accidents and calm him/her down.
Assigned Use
The band use is allowed for cutting wood or soft plastics. Only
manufacturer-recommended bands are allowed for use.
Firewood cutting is prohibited.
The manufacture shall not be held liable for any damage
should the provision of general regulations and this instruction
manual be not observed
Residual Hazards and Protective Action
Mechanical Residual Hazards
Hazard Description
Protective
Action
Residual
Hazards
Cutting, incision
Risk of injury caused by rotating
parts
A contact with rotating band
may cause severe injuries.
Never touch the saw band while
it is moving
Worn or damaged aids should be
replaced immediately.
Catching, winding
Loose-fitting clothes, jewels or
long hair may be caught by
moving parts.
Wear tight-fitting garments and
no jewels. Protect your hair with
a hairnet.
Electrical Residual Hazards
Hazard
Description
Protective action
Residual hazards
Direct electrical contact
Defective cable or plug may
cause an electrical shock
Wounds cause by conductive
parts on open electrical or
defective structural parts.
Have the defective cable/plug
exchanged by a professional.
Use the unit only if connected
via a faulty current switch (FI).
Always unplug before any
maintenance.
Operate only with FI switch
installed.
Indirect electrical contact
Materials and Other Substances Hazards
Hazard
Description
Protective Action
Residual Hazards
Contact, aspiration
Lungs may be affected by great
amount of dust being formed
.
Health-hazardous sawdust
emissions form operations
without extracting the dust.
Always wear breathing mask
when working with the unit.
Install and use an exhaust
equipment.
Human Factors Neglect
Hazard Description
Protective
Action
Residual
Hazards
Neglect use of personal
protection equipment
Operating the unit without
adequate PPE may cause
severe external/internal injuries
Always wear prescribed
protective clothing and work
considerately.
Inadequate local lighting
Insufficient light is a heavy
safety risk.
Provide for sufficient lighting
17
Summary of Contents for 55064
Page 135: ...135...
