Gude 01841, Translation Of Original Operating Instructions, Page: 16 / 56

16
data) in the feeding cradle that may be skewed towards
the rotary saw. This machine is intended for outdoor use
only and operation by one man. Other persons must keep
sufficient distance from the machine in operation.
The machine may be used in compliance with the
intended use only.
Any other use shall be regarded as use not compatible
with the intended use. The user/operator shall be liable for
any damage or injuries caused thereby and the
manufacturer shall be released from any liability. It is
permitted to use only the rotary saws suitable for this
machine (HM or CV). Use of HSS rotary saws and grinding
wheels of any type is prohibited. Operation of the machine
in compliance with its intended use is also compliance with
safety instructions, assembly manual and operation
instructions contained in the operation manual. Operators
and maintenance staff must be thoroughly informed about
the machine as well as all related risks. In addition, it is
necessary to accurately proceed in compliance with
applicable directives for accident prevention. Comply with
other generally applicable rules related to occupational
medicine and occupational health and safety.
Changes made to the machine release the manufacturer
from any liability for damage thereto.
Despite using of the machine in compliance with the
intended use, residual risks may not be totally excluded.
The following risks may occur due to the machine
structure:
•
Touching of the rotary saw on non-covered place of
the saw.
•
Touching of running rotary saw (cutting).
•
Ejecting of the material being cut and parts thereof.
• Cracking of the rotary saw.
•
Flying of defective parts from the machine.
• Hearing damage in case required PPE are not used.
The machine may be used in compliance with the intended
use only. Any other use in addition to above contradicts to
intended use of the machine.
The user/operator will be responsible for the above and
the manufacturer will be released from any liability. Please
note the appliance is intended for domestic use only. We
assume no warranty in case the machine will be used for
commercial purposes in trade or industrial operation and
for comparable activities.
Disposal
Disposal instructions are illustrated in the form of
pictograms on the device or packaging. Description of the
pictograms is given in "Identification" chapter.
Disposal of transport packaging
Packaging protects the device against damage during
transport. Packaging materials are usually selected
according to their impact on environment and they are
therefore recyclable.
Reuse the packaging materials to save raw materials and
to reduce volume of waste.
Parts of the packaging (e.g. foil, polystyrene) may be
dangerous for children.
Suffocation hazard!
Keep these parts of the packaging out of reach of children
and dispose as soon as possible.
Operator requirements
The operators must thoroughly read operation manual
before use.
Qualification
No special qualification is required for operation of the
machine except for a briefing conducted by a qualified
expert.
Minimum age
The machine may be used by person older than 18 years
only. An exception is use by younger person if the use
takes place under supervision of an adult trainer in the
course of education.
Training
Only appropriate briefing is required for use of the
machine. No special training is required.
Service
Any technical questions? Complaint? Do you need
spare parts or operation manual?
Visit our website www.guede.com and select Servis to
help you quickly and without officialdom. Please help us to
help you. In order to identify your device in case of
complaint, please indicate serial number, product number
and year of manufacture. All information is available on the
product label.
To have it still available, please put it here.
Serial number:
Product number:
Year of manufacture:
Phone:
+49 (0) 79 04 / 700-360
Fax: +49 (0) 79 04 / 700-51999
E-Mail: support@ts.guede.com
Troubleshooting
Defect Cause Remedy
Motor does not
run. 1. No power in
the machine.
2. Thermal
sensor
interrupted
power
supply.
1. Check power
supply - call
qualified
electrician.
2. Wait 5 - 10
minutes and
turn it on
again.
Motor does not
brake. 1. Worn
mechanic
brake of the
motor.
1. Let the
service
centre to
install a new
motor brake.
Motor turns off
during operation. 1. Thermal
sensor of the
motor is
defective.
2. Motor circuit
breaker
turns the
motor off
due to
overload.
1. Have it
replaced by
an expert.
2.
Wait until the
motor is
cold. Turn on
after 5 - 10
minutes
again.
Reasons of
overload 1. Too long
power cable
or too small
cross-
section of
the power
cable.
2. Rotary
saw
not sharp
enough.
3. Teeth of the
rotary saw
are of
incorrect
rake.
1. Let an expert
to install new
power
supply (also
extension
cables must
be rated
adequately).
2. Sharpen or
replace the
rotary saw.
3. Create
correct teeth
rake (by an
expert).