GÜDE Expert Sensor Box 7213, Manual

Page: 60 / 100

60
Expert Sensor Box 7213/7214 © 2022 GUDE Systems GmbH
Specifications
External Sensor Type Table "{7x01=0|7x02=1|7x03=2}"
Index Description Products
0 Temperature 7001, 7101, 7201
1 Temperature, Humidity 7002, 7102, 7202
2 Temperature, Humidity, Air Pressure 7003, 7103, 7203
External Sensor Field Table "{sen_field}"
Index Description Unit
0 Temperature °C
1 Humidity %
2 Digital Input bool
3 Air Pressure hPa
4 Dew Point °C
5 Dew Point Temperature Difference °C
4.6.2
Device MIB 7214
Below is a table of all device-specific OID 's which can be accessed via SNMP. In the
numerical representation of the OID the prefix " 1.3.6.1.4.1.28507 " (Gude Enterprise
OID) was omitted at each entry in the table to preserve space. The example for a com-
plete OID would be "1.3.6.1.4.1.28507.61.1.1.1.1". A distinction is made in SNMP OID 's
in between tables and scalars. OID scalar have the extension ".0" and only specify a
value. In SNMP tables the "x" is replaced by an index (1 or greater) to address a value
from the table.
Name OID Type Acc.
Description
esb7214TrapCtrl .67.1.1.1.1.0 Integer32 RW
0 = off 1 = Ver. 1 2 = Ver. 2c 3 = Ver. 3
esb7214TrapIPIndex .67.1.1.1.2.1.1.x Integer32 RO
A unique value, greater than zero, for each receiver slot.
esb7214TrapAddr .67.1.1.1.2.1.2.x OCTETS RW
DNS name or IP address specifying one Trap receiver slot. A port can
optionally be specified: 'name:port' An empty string disables this slot.
esb7214portNumber .67.1.3.1.1.0 Integer32 RO
The number of Relay Ports
esb7214PortIndex .67.1.3.1.2.1.1.x Integer32 RO
A unique value, greater than zero, for each Relay Port.
esb7214PortName .67.1.3.1.2.1.2.x OCTETS RW
A textual string containing name of a Relay Port.
esb7214PortState .67.1.3.1.2.1.3.x INTEGER RW
current state of a Relay Port
esb7214PortSw itchCount .67.1.3.1.2.1.4.x Integer32 RO
The total number of sw itch actions ocurred on a Relay Port. Does not
count sw itch commands w hich w ill not sw itch the ralay state, so just
real relay sw itches are displayed here.
esb7214PortStartupMode .67.1.3.1.2.1.5.x INTEGER RW
set Mode of startup sequence (off, on , remember last state)
esb7214PortStartupDelay .67.1.3.1.2.1.6.x Integer32 RW
Delay in sec for startup action
esb7214PortRepow erTime .67.1.3.1.2.1.7.x Integer32 RW
Delay in sec for repow er port after sw itching off