GÜDE Expert Power Control 8314, Manual

Page: 50 / 111

50
Expert Power Control 8316 © 2022 GUDE Systems GmbH
Configuration
Sender address: The E-Mail address of the sender.
Recipient address: The E-Mail address of the recipient. Additional E-Mail addresses,
separated by comma, can be specified. The input limit is 100 characters.
SMTP Server: The SMTP IP-address of the E-Mail server. Either as FQDN, e.g:
"mail.gmx.net", or as IP-address, e.g: "213.165.64.20". If required, attach a designated
port, e.g: "mail.gmx.net:25".
SMTP server port: The port address of the E-Mail server. In the normal case this should
be the same as the default, that is determined by the setting SMTP Connection Secur-
ity.
SMTP Connection Security: Transmission via SSL or no encryption.
SMTP Authentification (password): Authentication method of the E-Mail Server.
Username: User name that is registered with the SMTP E-Mail server.
Set new password: Enter the password for the login to the E-Mail server.
Repeat password: Enter the password again to confirm it.
If the password mask is redisplayed, only four "bullets" are shown as a symbolic
placeholder, since for security reasons the password is never shown itself. If you want to
change a password, the complete password must always be re-entered.
E-Mail Logs: Logging of E-Mail system messages.
3.7 Front Panel
Button Lock: Disables the front buttons (activates the key lock) with the exception of the
bootloader activation.
Allow switching all ports: Allows to switch all ports on or off with the front panel buttons.
Display 1 default: Selects what sensor is displayed in the display.