GÜDE Expert PDU Energy 8340 Series, Manual

Page: 7 / 82

7
Expert PDU Energy 8340/8341 © 2021 GUDE Systems GmbH
Device Description
·
Measurement of residual current for all phases ( models 8340-2, 8341-2 )
·
Hot Swap Drawer - The device electronics, including power supply, can be replaced
on a drawer without the need to turn off the PDU consumers
·
Connecting of two optional external sensors to determine the temperature and hu-
midity, or a input switch
· One three-digit 7-segment LED displays (for display of current, external sensor val-
ues, IP-address and device status)
· Console commands via SSH and Telnet
· SSH support with public key and passwords
·
Programmable timetables for console commands
·
Dual TCP/IP stack with IPv4 and IPv6 support (IPv6-ready)
·
Control and monitoring of the device via Ethernet with an integrated web server with
SSL encryption (TLS 1.1, 1.2, 1.3)
·
Configuration with CGI parameters and JSON messages via HTTP (REST API)
·
SNMP (v1, v2c and v3, traps)
·
MQTT 3.1.1 Support
· Modbus TCP support
· Radius support
·
Generation of messages (e-mail, syslog and SNMP traps) depending on sensor
measurement limits
· Firmware update during operation via Ethernet possible
· Encrypted e-mails (SSL, STARTTLS)
·
Access protection through IP access control
·
Low own consumption
·
Developed and produced in Germany
1.4 Installation
Front of the device
1. Current power consumption of Phase (7-segment LED)
2. 8 plain text displays L1 to L4 as voltage indicator (green symbol) and which phase
is shown in the display (red symbol)
3. Status LED
4. Buttons "Select" and "OK"
5. Ethernet connector (RJ45)
6. External sensor connectors (RJ45)