53-15-005-02 Assembly Instructions for Cobra Wall Lamp
C A R E I N S T R U C T I O N S
T E C H N I C A L I N F O R M A T I O N
T R O U B L E S H O O T I N G
Unplug power cord prior maintenance. To clean, use a soft cloth only.
Do not use any chemical or abrasive cleaners.
Light source: E14, recommended bulb 4 W LED 400 lumens. - Max LED 8W max
Turn power off when changing light bulb. Isolation class II. The lamp is not approved
for outdoor use or use in damp/wet rooms (IP20).
If lamp does not light, turn off the power. Check the bulb for a broken
filament. Replace bulb if necessary, then turn it on. If the lamp still does
not light, please contact customer service at the local dealer. If the
external flexible cable or cord of this lamp is damaged, it must be
replaced by a qualified electrician in order to avoid a hazard.
For enquiries contact GUBI A/S
- CVR: 17940384
Klubiensvej 7-9. 2150 Nordhavn. Copenhagen, Denmark
T +45 69 15 60 60 – [email protected]
GUBI.COM
