18
4.
Attach the nozzle post assembly to the vertical bracket with hardware supplied and
secure post in place. Attach the air hose from the nozzle assembly to the discharge port
of the air compressor.
5.
Loosen the 2 knobs on the Nozzle swivel and adjust the nozzle vertically to the desired
attitude. Loosen the single bolt below the nozzle swivel and adjust the nozzle
horizontally to the desired position then retighten.
6.
Fill the fuel tank with unleaded gasoline of not less than 87 octane.
ALWAYS
take
precautions when filling the machine with fuel.
NEVER
fuel the machine while running
and
ALWAYS
wait for a hot machine to cool before fueling.
7.
Check the engine oil level by loosening and removing the engine oil dip stick. Ensure oil
level is between the H and L.
8.
Visually check the oil level on the air compressor by ensuring the oil level is visible and
2/3 full in the sight gauge on the side of the compressor.
ENGINE STARTING & STOPPING
The Guardian 55ES has either a 4 hp Kawasaki or 4 hp Honda engine that has an on/off ignition
switch connected electrically to the engine. When the engine is cold, the manual choke will be
