21
02.2013 | G27021 | Printed in Germany
Min. sash high
Installation method
Travel
240 mm
Travel
360 mm
Frame mounting on tilt window inward
600 mm
1100 mm
Sash mounting on tilt window inward
400 mm
650 mm
Frame mounting on top hung window
250 mm
350 mm
Note!
º
Smaller sash heights:
please contact us if smaller sash heights are required.
6 Preparing to install
DANGER Incorrect use may cause injury to people and damage
to property
Please refer to the type label of the motor and the technical data in section
„5 Technical data for 1 motor“ on page 19 to ensure that your have se-
lected the right motor for your installation situation.
º
Examine the delivered equipment immediately upon receipt and check it for possible
transport damage. Do not install the motor if it is damaged
Note!
º
Tilt windows must be rebated (sash overlap > 0 mm) to provide for their
safe closing (see picture below).
>= 0 mm
