6
DTN 80
02.2019 | Designed in Germany
Swing-door drive
Operating instructions
eng
1.2 Notes
Please observe national standards and guidelines for power-operated
doors.
Attach stickers to transparent elements (DIN EN 16005).
Compliance with the operating and servicing conditions specified by the
manufacturer is part of intended use.
Maintenance and repair works must only be carried out by experts acting
under the authorisation of GU Automatic.
GU Automatic excludes any liability for damage arising from changes made
to the system without its consent.
Once the swing-door drive has been installed correctly, it is then only
suitable for standard opening and closing operation. Any other use is not
permitted and shall exclude the manufacturer from liability.
The installation or service business must be informed about any construc-
tional changes (floor, air flow conditions etc.) in the area around the door
system that could affect its function.
1.3 Fire-rated door
When used in the fire protection area, the swing-door drive is part of the
hold-open system. The fire door must therefore be marked as a hold-
open system.
