Issue 08/2013
Page 90
M
A
PL
A - M
odu
la
r e
ne
rg
y s
up
pl
y s
ys
te
m f
or l
oa
d li
ft
in
g m
ag
ne
ts
Installation and commissioning
Arrangement of the hydraulic drive
applied torque of the motor:
in [Nm]
with the pressure difference between the input and output of the
hydro-motor
calculated in [bar]
e.g. via
Pump in total
-
backing-up valve
-
counter-pressure tank
in bar
and with the hydraulic / mechanical efficiency of the hydro-motor
in [
%
/
100
] caused by losses due to friction, etc.
applied output from the motor to the shaft:
in [Watt]
with the overall efficiency of the engine
in [
%
/
100
]
Conversion of torque into output:
in [Watt]
with the speed [
revs.
/
min
] and torque
in [ Nm]
Operating a GTS iMAPLA at SunFab Hydro-Motors
GTS offers options in the arrangement of the hydraulic drive through the
use of special flow rate control valves. The indicated working pressures
and volume flows in the table are to be used using the SunFab axial piston
hydraulic motors (optionally also) offered by GTS. Other motor types can also
be adapted by a variable assembly of plate and a variety of couplers. Contact
GTS special adjustments and special layouts and special layouts.
Ö
Overview table for the operation of a GTS
motor generator types: BG132 2-pole and BG160 4-pole., page 91
