GTS BG 132, Installation And Operating Manual

Page: 97 / 128

Page 97 Issue 05/2013
Maintenance and care
Maintenance work, authorised technicians
Monthly work, operators
>
Inspect the generator housing for outwardly visible damage and excess
contamination. This can impair the cooling.
>
Where necessary, clean the generator with a damp cloth.
>
Check whether the sign attached to the generator for the safety and
warning information and the rating plate is easy to read.
>
Where necessary, clean the signs or replace them.
>
Inspect the cooling air openings on the reverse side of the generator for
dirt which could impede the flow of cooling air. If necessary, clean with
a damp cloth. Where necessary, clean with a damp cloth.
Generator with attached switch box
>
Check the housing of the switch box and the integrated power sockets for
outwardly visible damage and contamination.
>
Where necessary, clean the switch box with a damp cloth.
>
Check whether the transparent cover of the switch box and the hinged
covers of the power sockets are not damaged and close correctly.
8.4 Maintenance work, authorised technicians
Warning
Risk of injury and risk of damage!
y Inadequately qualified persons are at risk when working
on the generator or switch cabinet and may damage the
generator.
► The assembly / disassembly of generator as well as the
maintenance, service and replacement work may only be
carried out by authorised and qualified technicians.
Read and follow the chapter on safety instructions as well as the safety
information indicated here.
Ö
Safety instructions, page 10