GTS BG 132, Installation And Operating Manual

Page: 47 / 128

Page 47 Issue 05/2013
Installation of generator
Installation of single-bearing generators
>
Secure the bearing plate to the generator with the four mounting
screws [2] (Figure 12).
>
Attach the fan wheel cover [1] (Figure 12).
1
4x
3
2
Install a appropriate seal
for the drive motor
Fig. 11 Assembly of brushless single-bearing generators on the motor (1)
1
2
4x
Fig. 12 Assembly of brushless single-bearing generators on the motor (2)