Procedure
1. Lift the output (A).
2. Position the output (A) in the
openings of the shredderbox.
3. Tilt the output.
4. Make sure that the locking key (B)
correctly fits in the safety lock switch
(C).
5. Install the bolts (D).
4.3
Install the high output
Caution:
Never install the low and high output at the same time.
4.3.1
Remove the cover plate of the high output
Preliminary requirements
•
Wrench size 13
Procedure
1. Remove the bolts (A) and washers
(B).
2. Tilt the cover plate (C).
3. Remove the hinges (D) from the holes
(E).
4. Remove the cover plate.
2
2
3
D
C
B
A
3
2
D
E
C
A B
Installation
20
D09-CC13S20-11
