GTC REVPAD, Manual

Page: 56 / 91

GTC Sound Innovations REVPAD Manual
50
you exit Single mode, the Base unit displays the active Patch, and the Normal LED becomes illuminated. See “Touchpad Control
Button Assignment” on page 65 for more information.
Tap Tempo Mode
Tap Tempo mode allows you to change the tempo of the active Patch. When you have set the tempo parameter of individual effects
to
GLOB
(global), you can invoke Tap Tempo mode and change the global tempo of the Patch by tapping your desired tempo on the
Touchpad. See “Tempo and Global Tempo” on page 40 for more information.
Note: Because you will be looking at the Touchpad from above when it is attached to your guitar, the illustration shows the “guitar-
ist-eye-view.”
Follow the procedure below to initiate Tap Tempo mode.
1. Assign Tap to a Control Button or Control Button pair on the Touchpad. See “Touchpad
Control Button Assignment” on page 65 for more information.
2. Activate Tap Tempo mode by pressing the assigned Control Button or Control Button pair.
3. The current global tempo and time appear in the Editing Screen (
A
).
4. Tap the Touchpad (
B
) with your finger in the desired tempo. The tempo (beats per minute
and time) in the editing display changes in response to your taps.
5. Once you have finished tapping the new global tempo is set.