Page 16
Installing Optional Modules
When fitting any optional modules place the terminal face down on a clean flat surface that will not scratch
the glass front and remove the lower and upper rear covers. Remove battery, this is optional but generally
makes the fitting of modules easier. Once the chosen modules have been fitted, refit the upper rear cover
first, ensuring no cables are trapped, followed by the lower cover.
Tip:
You may find it easier to refit the lower cover with the battery removed and then fit the battery
afterwards, ensuring the battery retaining clip pops out to secure the battery in place.
Front Plate
Depending on the option chosen the GT8 lower glass front plate may be either.
With fingerprint aperture.
Without fingerprint aperture.
Both versions may be (optionally) customised to include a company logo etc.
Warning:
Once secured the
lower glass front plate cannot be
removed without damaging it.