Page 14
Power Options
AC 110-240V via Adapter
The GT8 Terminal can be powered from an AC power outlet using an optional plug-top or wall wart power
supply. Adapters include
AE-PSU-PT-12VDC universal adapter with UK, Europe, Australia and US interchangeable AC plugs
AE-PSU-NA-12VDC adapter with US AC plug
DC 12V
The Terminal can be powered from a suitable
12Vdc power supply with 2.1mm DC plug centre
positive connected to the ‘+12V DC’ power in jack.
The supply should have a stabilised voltage output
of 12VDC ±5% with minimum 2A capacity. The
power supply should incorporate suitable overload
protection.
The GT8 power indicator will show blue when power
is supplied via the 12V power jack either with direct
DC connection or with an AC power adapter.
Power over Ethernet PoE
The GT8 may be powered via the Ethernet cable
with suitable upstream PoE+ switch or injector.
Supported standards
IEEE 802.3at (PoE+) injector provides Terminal
with 2000mA @12V
Note:
PoE+ is recommended to ensure there
is sufficient power available to support different
configurations of the terminal.
When the GT8 is running from PoE the power
indicator on the front of the Terminal will show green.