2
3
1
4
1
Bluetooth Receiver
2
Bluetooth Speakers
3
Recharge Cable
4
Speaker Extension Cable
Note:
1. The audio cable should be inserted when the receiver is not turned on.
2. The receiver cannot be used when it is charging.
Connecting to smartphones and other devices:
1. Long press the power button for 2 s to turn on the Bluetooth receiver. The LED indicator
light flashes red and blue, and the voice prompt says that "
the Bluetooth device is
ready for pairing.
"
2. Activate the Bluetooth function on your phone and search for wireless devices. Pair your
phone to "
GTRACING
".
3. After successful pairing, voice will prompt "
Pairing completed
".
4. If the connection is broken, you will hear a voice prompt that "
the Bluetooth device has
been disconnected and the device will be ready to pair again.
"
5. If there is no connection, the Bluetooth receiver will automatically turn off after 5 min.
6. After connection, the blue light will light up. After a period of time, it will enter the energy
-saving mode and only one blue light will be on for a long time. Click the power button to
check the remaining battery
.
( There are 4 blue lights in total, and one blue light represents
25% battery)
7. Charge the Bluetooth receiver with Type-C charging cable for 90 min, and it will be
fully charged. The LED indicator light flashes blue when charging, and 4 blue lights are
always on when fully charged.
8. Function use: When connecting the computer/mobile phone music, you can press the
power button to realize the pause / play function.
TECHNIQUE SPECIFICATION
Power Input
Output Voltage
Battery Capacity
Charging Time
Working Frequency
Working Time
Wireless Streaming Range Distance
Support Mobile System
USB 5V
3.8V
1000mAh
90 min
2.402 ~ 2.483ghz
16 Hours
10~15m
Android / iOS
🅤
🅥
🅣
