1. Overview
S-9102R Stand Alone Smoke Detector (here
called smoke detector for short) detects smoke
produced by a fire and gives alarm signals in
time.
Using optical smoke sensing parts and art of
state production technologies, it has a stable
performance, esthetical appearance and can be
easily installed, no commission required. It is
designed to monitor fires may occur in places
such as houses, all kinds of shops, pubs, bars
and etc.
Built-in a buzzer can give an alarming sound
aloud and silence it. Two AA 1.5V LR6 alkaline
batteries will be operating up to three years.
2. Technical Specifications
1)
Power supply: 2 AA 1.5V LR6 alkaline
batteries, operates up to 3 years or so.
2)
Indicator: Red, flashes in every 45
seconds in normal condition.
3)
Sound Level
＞
80dB@3m
4)
Switch output terminals C+, C-
(polarity-sensitive):
External maximum voltage: 30V
Maximum current: 60mA
5)
Detection Area: 60m
2
~100m
2
6)
Operating Environment:
Temperature: -10
℃
~ +50
℃
Relative Humidity
≤ 95%, non- condensing
7)
Dimension: 120mm x 58mm(D x H, with
base)
8)
Material of Enclosure: ABS
9)
Weight: 181g(without base)
10)
Mounting Hole Distance: 50mm~74mm
3. Installation and Wiring
3.1. Location of Smoke detectors
One smoke detector should be installed in an
individual room. Refer to Fig. 1.
S-9102R Stand Alone Smoke Detector
Fig. 1
3.2. Mounting Position
1) Recommended Location
The position of a smoke detector is critical if
maximum speed of fire detection is desired. This
smoke detector can be mounted on a ceiling or
wall. Thus, the best location for a smoke detector
is the center of the ceiling. At this location, the
smoke detector is closest to all areas of the
room.
When mounted on ceilings, the edge of the
smoke detector should be at least 50cm to
any wall.
When mounted on slope or gable roof, the
smoke detector should keep a certain
distance from the roof. The distance should be
0.2m when slope angle is less than 30
. It
should be 0.3m
～
0.5m if the angle is more
than 30
.
2) Locations to avoid
To avoid false alarms, do not install smoke
detectors:
In or near areas where combustion particles
are normally present such as kitchens. In
garages where there are particles of
combustion
in
vehicle
exhausts.
Near
furnaces, water heater, or gas space heaters.
The smoke detectors should be installed at
least 6 meters away from kitchens and
other areas where combustion particles
are normally present.
In air streams passing by applications such as
kitchens.
In damp or very humid areas, or next to
bathrooms with showers. The moisture in
humid air may cause false alarm.
Install
smoke detectors at least 3 meters away
from bathrooms
Issue.1.02 August, 2014
Room
Room
Room
Room
Room
Room
Hall
