manualshive.com logo in svg

GST Onvif Oncam C-12 OUTDOOR PLUS, Installation And User Manual

The GST Onvif Oncam C-12 OUTDOOR PLUS is a high-performance outdoor surveillance camera that ensures enhanced security. To get started with this cutting-edge product, you can easily obtain its comprehensive Installation And User Manual. Download it for free from our website, providing step-by-step guidance for hassle-free setup and optimal usage.

Share
Download
background image

 

 

 Installation & User Manual – Oncam C-12 Series 

 

 

 

 

 

© 

Oncam Global Group AG, 2021. All rights reserved. 

182 

 

Global Settings 

5.6.2.1  Motion and Analytics Global Settings for Rules Overview  

This section allows you to configure the advanced analytics engine's global settings. These 

settings affect the performance of the analytics. 

 

 

 

Expert Mode

  needs to be turned 

On

  to view this tab. Go to Camera Web Interface > 

Dashboard > Expert Mode > On 

 

 

 

Figure 250 Motion Analytics Global Settings 

5.6.2.1.1  Motion Sensitivity 

This affects all analytics and motion detection. It is a scale of how sensitive the threshold is on 

each pixel to determine if it has changed and thus there is motion. Default Settings should work 

for most scenes. 

5.6.2.1.2  Motion Threshold 

This affects all analytics and motion detection. It is a scale of how large a group of changing 

pixels is before it is determined as a motion area for investigation by the analytics engine. 

Default Settings should work for most scenes. 

5.6.2.1.3  Motion Alarm Delay 

This setting determines how long motion must be present before a Motion Alarm event is 

triggered. The camera will wait for this number of milliseconds of consistent motion before 

triggering an event. This setting only effects Whole Scene Motion Detector, Motion Region 

Detector and Region Object Detector rules which create motion alarm data. 

5.6.2.1.4  Motion Alarm Persistence 

This setting determines how long a motion event persists after the motion ends. The camera 

will wait this number of milliseconds after the end of motion before ending the event. This setting 

only effects Whole Scene Motion Detector, Motion Region Detector and Region Object Detector 

rules which create motion alarm data. 

Summary of Contents for Onvif Oncam C-12 OUTDOOR PLUS
































































































































































































































Reviews:

No comments

Related manuals for Onvif Oncam C-12 OUTDOOR PLUS

RadiaCode 10 Series User Manual preview
10 Series
Brand: RadiaCode Pages: 42
EasyN P1 Quick Installation Manual preview
P1
Brand: EasyN Pages: 11
VCT Vision Elite Series User Manual And Installation Manual preview
Elite Series
Brand: VCT Vision Pages: 48
Eaton PH1 Technical Manual preview
PH1
Brand: Eaton Pages: 32
Observint T5 Quick Installation Manual preview
T5
Brand: Observint Pages: 2
Vaxcel T0173 Assembly And Installation Instructions preview
T0173
Brand: Vaxcel Pages: 5
D-MAX DCC-608DV User Manual preview
DCC-608DV
Brand: D-MAX Pages: 8
VADDIO RoboSHOT 12E HDBT Manual preview
RoboSHOT 12E HDBT
Brand: VADDIO Pages: 2
Stealth Cam STC-I890 User Manual preview
STC-I890
Brand: Stealth Cam Pages: 45
Banner SLLVE23-350 Instruction Manual preview
SLLVE23-350
Brand: Banner Pages: 76
MAXIMUM Security VIP Pro Installation & Operating Manual preview
VIP Pro
Brand: MAXIMUM Security Pages: 40
A-MTK AH21K7M Installation Manual preview
AH21K7M
Brand: A-MTK Pages: 17
HACA LEITERN 0529.74.50 Instructions For Use Manual preview
0529.74.50
Brand: HACA LEITERN Pages: 64
Black BLK-CWD208VH2 User Manual preview
BLK-CWD208VH2
Brand: Black Pages: 27
Idis DC-Y6C16WRX Operation Manual preview
DC-Y6C16WRX
Brand: Idis Pages: 49
Soca ST-660 Operation And Installation Manual preview
ST-660
Brand: Soca Pages: 19
Novus NVIP-1DN3020V/IR-1P User Manual preview
NVIP-1DN3020V/IR-1P
Brand: Novus Pages: 40
XtendLan XL-ICA-106M2 User Manual preview
XL-ICA-106M2
Brand: XtendLan Pages: 34

Brands by name

Popular brands

Load more brands