9
2.
In case of fault, never remove or open the
detector by yourselves. Inform our company or
our local office for repair.
VIII Cautions
1. Don't install the detector at locations with
high temperature (near stoves) or too much oil
smoke
(near
kitchen
ventilator);
Keep
environment around the detector clean.
2. Please contact local gas company and ask
a professional engineer to install a solenoid
valve on the gas pipeline if it is required. The
detector can only control JJ or FCR series
solenoid coming with the detector. If other
models are to be used, please consult us.
3. The detector should be tested every half
year.
4. Natural gas detector can be tested by a
lighter. Put the lighter near the sensor (over
10cm) press its switch to turn it on and then
blow off the flame. The detector should go into
alarm in about 10 seconds.
5. The detector will be normal with a bit hot in
operation.
6. Never cut down the power of the detector.
Summary of Contents for C-9602LW-NG
Page 1: ......
