- 22 -
STIM 1916 CT
o
utPut
By default QAM modulation is set for the output. If you would like to use
COFDM at the output, first you have to select COFDM for the output setting in
menu
System > Firmware
and confirm with button
.
The station restarts!
DVB-C/QAM
DVB-T/COFDM
151
150
152
154
161
155 156 157
153
180
151
150
161
180
152
154
160
159
158
156
157
155
—> Via the background colour of column Line you are informed about
the quality of the input signals (
good/
no signal), a possible
exceeding the output data rate (
), or whether the modulator is
switched off (
).
150
The upper value shows the current needed data rate.
The lower value shows the maximum possible output data rate (depend-
ing on the output settings).
—> The background colour
in column
Line
indicates an output data
overflow.
In this case change the output settings or remove stations from the
data stream in menu Multiplex.
151
In column
Modulator
, switch on or off the modulators of the individual lines.
