- 10 -
STIM 1916 CT
3.2 i
nstalling
the
deviCe
– The device should only be installed in a room where the permissible ambi-
ent temperature range (0 °C … +50 °C ) can be maintained, even during
fluctuations in climatic conditions.
• Attach four cage nuts
26
at the installation site.
We recommend the use of lateral slide rails/component carriers in order to
relieve the front panel.
26
• Screw the unit with the mounting screws
28
and the washer
27
to the four
cage nuts
26
.
27
27
28
28
3.3 P
otential
equalisation
(Pe)
Equalise the potential (PE) in accordance with IEC/EN/DIN EN 60728.
• Connect the PE connection terminal
17
to a PE rail (supplied by customer)
using the PE wire (Cu 4 mm
2
- 9 mm
2
).