- 5 -
PAMS 4000
Connections
SAT output: ............................................................................ 1 F socket
ASI input: .......................................................................... 1 BNC socket
Connection strip (10-pin): ..................for supply voltages and control circuits
RS-232 socket: ..................................... serial interface for software update
Remote maintenance
Remotely controllable (via PSW 1000*): ..............................................yes
(* and a corresponding management unit)
2.4 d
esCriPtion
The modulator converts channels from the ASI input into one DVB-S trans-
ponder.
The cassette has one RF output as well as an ASI input (ASI – Asynchronous
Serial Interface acc. DIN EN 50083-9).
From the transport stream fed via the ASI socket services can be removed.
b
loCk
d
iagr a m
SAT Output
DVB-S-IF
Modulator
Service
Filter
47 dB
Attenuator
ASI IN
g
ener al
The cassette is designed for operation with a PADE 4000.
The ASI output signal of the PADE 4000 is fed into the ASI input.
Individual services can be removed via the program filter.
—> Note the maximum possible output data rate of 72.573 Mbits/s,
which depends on the DVB-S output parameter settings!
When the head-end station is switched on, the two-line LC display shows the
software version of the control unit.
To operate this cassette the software version of the control unit must be "
V 45
"
or higher. You can find the current operating software for the control unit and
the cassette, the software "
BE-Flash
" and the current assembly instructions on
the website "
www.mygss.eu
".
The cassette is intended for use in GSS.modular professional head-end stations.