GSS HRC 300 AV, Assembly Instructions Manual

Page: 14 / 21

- 14 - HRC 300 AV
hf
output level
In this menu you can set the HF output levels of the channel strips " A ", " B " and
" C " to the same values and switch on or off the modulator of the channel strip.
Bx 1A
Level -3 MODULATOR
on
• Measure and note down the output level of channel strip " A ".
• Activate menu item " Selecting the channel strip " using the button
and select channel strip " B ".
• Activate the " MODULATOR Level " menu by pressing the button.
• Measure and note down the output level of channel strip " B ".
• Repeat this procedure for channel strip " C ".
• Select the channel strips with the higher HF output levels one after the other
and by pressing adjust the higher output levels of the channel strips to
the output level of the channel strip with the lowest output level (" 0 " to " –15 "
dB).
• Activate menu item " Selecting the channel strip " using the button if
necessary and call up the channel strip to be programmed.
s
witChing the modul ator off
/
on
Bx 1A
Level -3 MODULATOR
on
• Place the cursor under " on " or " off " using the buttons.
• Press to switch the modulator of the channel strip " off " or " on ".
—> In position " off " the " Level " menu item is inactive.