- 9 -
HDTV 1000 TD
g
ener al
The cassette is equipped with two channel strips ("
A
" and "
B
"). The channel
strips consist of the digital tuners, the digital signal preparation units and the
output converter. The channel strips are indicated in the head-end station dis-
play with "
Bx …A
" and "
Bx …B
". Using an adequate CA module scrambled
channels can be descrambled via channel strip "A". The control of the cassette
takes place via the control unit of the head-end station.
Two LEDs provide an indication of the SAT IF input signal quality based on
their colour and indicate if the respective channel strip is switched on (LED
illuminates) or off. Additionally the quality of the transport stream received is
displayed ("
CN…
"). The integrated TPS module (Transport Stream Processing)
processes the data of the transport streams.
The COFDM modulated RF output signals are sent through the RF output of the
cassette to the output collector. The common output level of the channel strips
can be set at the output collector. Additionally a transport stream is made
available via the ASI output dependent on the signal path set.
When the head-end station is switched on, the two-line LC display shows the
software version of the control unit. To operate this cassette the software ver-
sion of the control unit must be "
V 44
" or higher. You can find the current op-
erating software for the control unit and the cassette, the software "
BE-Flash
"
and the current assembly instructions on the website "
www.gss.de/en
".
The cassette is intended for use in the STANDARD LINE head-end stations.
2.5 s
oft ware
query
Control unit
If necessary, you can activate the indication of the software version of the
control unit manually:
• Press any two keys on the control unit of the head-end station simultaneously
until the display goes dark and the software version, e.g. "
V 44
" appears.
Cassette
After activating the cassette the software version of the cassette is displayed
(see page 20).
