GSS HDTV 1000 T, Assembly Instructions Manual

Page: 25 / 48

- 25 - HDTV 1000 T / HDTV 1001 T
Adjusting the output levels of the channel strips
This menu item is used to set the output levels of the modulators of the channel
strips “A” and “B” to the same value .
Bx 4A
-3 dB LEVEL
Ê UÊ i>ÃÕÀiÊ>˜`ʘœÌiÊ`œÜ˜ÊÌ iʜÕÌ«ÕÌʏiÛiÊœvÊÌ iÊV >˜˜iÊÃÌÀˆ«°Ê/œÊ>`ÕÃÌÊÌ iÊ
output level to the output levels of the other cassettes please pay attention
to chapter 6 “Final procedures”.
Ê UÊ ÞÊÀi«i>Ìi`ÞÊ«ÀiÃȘ}ÊÌ iÊ button scroll back to the “Selecting the
channel strip” menu.
Ê UÊ -iiVÌÊÌ iÊœÌ iÀÊV >˜˜iÊÃÌÀˆ« (page 23) and set the following menu items:
Ê UÊ º-iiV̈˜}ÊV >˜˜iÊÉÊvÀiµÕi˜VÞÊÃiÌ̈˜}»Ê­«>}iÊÓή°
Ê UÊ º-iÌ̈˜}ÊÌ iʜÕÌ«ÕÌÊV >˜˜i»ÊœÀʺ-iÌ̈˜}ÊÌ iʜÕÌ«ÕÌÊvÀiµÕi˜V޻ʭ page 24).
Ê UÊ -܈ÌV ʜ˜ÊÌ iʓœ`Տ>̜ÀʈvʘiViÃÃ>ÀÞÊ­ page 24).
Ê UÊ i>ÃÕÀiÊ>˜`ʘœÌiÊ`œÜ˜ÊÌ iʜÕÌ«ÕÌʏiÛi°
Ê UÊ V̈Û>ÌiÊÌ iÊ “ LEVEL ” menu of the channel strip with the higher output level.
Ê UÊ ÞÊ«ÀiÃÈ ng adjust the higher output level of the one channel strip to
the lower output level of the other channel strip incrementally (“ 0 »Êoʺ –10
dB ”).
Ê UÊ *ÀiÃÃÊÌ iÊ button.
—> The “Setting the LNB oscillator frequency” – “ LNB ” menu is activated.
Setting the LNB oscillator frequency
Set the oscillator frequency of the LNB used in this menu.
Bx 4A
10600 MHz LNB
Ê UÊ 1ÃiÊ to place the cursor under the digit to be set for the oscillator
frequency displayed.
Ê UÊ *ÀiÃÃÊ to enter the respective digit of the oscillator frequency of the
LNB used.
Ê UÊ ,i«i>ÌÊÌ iÊ«ÀœVi`ÕÀiÊLÞÊÌ iʵÕ>˜ÌˆÌÞʜvÊÌ iÊ`ˆ}ˆÌÃÊ̜ÊLiÊÃiÌ°
Ê UÊ *ÀiÃÃÊÌ iÊ button.
—> The “Setting the input symbol rate” – “ SYMBOL ” menu is activated.